Latest Post
Wound Rotor Induction Generators (WRIGs): Design and Testing
Written By Sajib Barua on Sunday, June 1, 2014 | 9:41 AM
Wound Rotor Induction Generators: Transients and Control
Written By Sajib Barua on Saturday, May 31, 2014 | 5:35 AM
Subscribe to:
Posts (Atom)
Popular Posts
-
Figure 2.7 shows a circuit with a supply system whose open-circuit voltage is E and short-circuit impedance is , where . The load impedanc...
-
The load in Figure 2.7 can be expressed as an admittance Y = G + jB supplied from a voltage V, where Y = 1/Z. G is the conductance, i.e. t...
-
The high demand of electricity together with the continuously variable nature, and our inability to store electricity in a significant num...
-
Distribution networks may be classified as either meshed or radial. However, it is customary to operate meshed networks in radial fashion...
-
The phasor diagram for the system in Figure 2.16 is shown in Figure 2.17, assuming that the load has a lagging power factor angle ϕ. The li...
-
The system load varies continuously with time in a random fashion. Significant changes occur from hour to hour, day to day, month to month...
-
Power flow studies Although in reality the power network is in a continuous dynamic state, it is useful to assume that at one point the...
-
Consider a simple load R+jX with a current I and voltage V, Figure 2.6. The complex power S is defined as (2.2) S can...
Posts
